DD 2mm Plastic Support

Our 2mm plastic support is perfect for projects that have low threshold height restrictions. This simple easy to use design allows paving to b laid in areas with threshold heights as low as 22mm.
The 2mm support can also be used with our 1.5mm rubber shims for fine adjustment.






DD Plastic Stackable Supports


Plastic support pads are designed for use with paving slabs on balconies, flat roofs and terraces. Manufactured from injection moulded high density polypropylene. They are available in three standard sizes, 10mm, 12mm and 15mm thick.
All our plastic supports come with 3mm lugs as standard. 10 & 15mm supports can be supplied with 5mm lugs if required on special request.
They are designed to stack on top of one another, where installers wish to increase the height of the cavity at intervals – to work around gutter and service pipes, for example. Although lightweight, they are very tough, with a weight tolerance of 400kg per support pad.
By suspending the paving, they allow water to run away from the deck underneath. They also help to prevent the build-up of dirt and other material between the slabs.
This system eliminates ponding on the upper surface of the roof or balcony paving.
1,2 and 3mm leveling shims are also available to allow for undulations in the roof surface and minor variation in paving slab thickness.



DD 8mm Rubber Supports



DD rubber supports are designed for laying paving on flat roofs, balconies and terraces. When installed they support the pavers 8mm above the waterproofing, creating a free draining area.
The rubber composition of the support helps reduce the likelihood of damage to the waterproofing.
Supplied with integral 3mm spacer lugs. 5mm spacer lugs can be supplied for fitment on special request.
Please see our guide to installation for more information on how to use the DDP00 rubber supports.
1.5mm leveling shims are also available to allow for undulations in the roof surface and minor variation in paving slab thickness.



Heavy Duty 16mm Plastic Supports



DD rubber supports are designed for laying paving on flat roofs, balconies and terraces. When installed they support the pavers 8mm above the waterproofing, creating a free draining area.
The rubber composition of the support helps reduce the likelihood of damage to the waterproofing.
Supplied with integral 3mm spacer lugs. 5mm spacer lugs can be supplied for fitment on special request.
Please see our guide to installation for more information on how to use the DDP00 rubber supports.
1.5mm leveling shims are also available to allow for undulations in the roof surface and minor variation in paving slab thickness.